That is because you don't need one.

http://www.elecraft.com/manual/E740174%20Proset%20for%20the%20KX3%20Rev%20A.pdf

Mike va3mw


On Sun, Dec 28, 2014 at 7:25 PM, Don Wilhelm <w3...@embarqmail.com> wrote:

> Carl,
>
> Take note that Heil does not offer an adapter to use its microphones with
> the KX3.
> Need I say more?
>
> 73,
> Don W3FPR
>
> On 12/28/2014 5:40 PM, Carl Jón Denbow wrote:
>
>> Dave, et al:
>>
>> Thanks for all the fine comments and feedback I've received both on the
>> message board and by direct email message.  I do have the MIC BIAS "on' and
>> the MIC BTN "off."  Another person suggested that I adjust the TX EQ, which
>> I have done, basically boosting 2.4 KHz and above by 4db and rolling off
>> 200Hz and below by 4db. After making these adjustments, I've been told by a
>> local ham who had heard the previous settings that my audio quality was
>> improved; however, he quickly added the the Elecraft MH3 mic still sounded
>> better even before the EQ adjustments.  I'm not exactly sure what to make
>> of this, since the Heil headset is, obviously, a much more expensive piece
>> of equipment.   However, it's possible that making the conversion pigtail
>> that you suggested might cure the problem.
>>
>> I do have a Yamaha CM500 on order.  It'll be interesting to compare
>> reports once that arrives.
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va...@portcredit.net
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to