If you have it connected to the AUX connector on the K3, make sure you
have set DIGOUT1 to ON in the config menu on the bands that you want to
activate the preamp on.
On 5 Jan 2015 19:17, STEPHEN R wrote:
Good morning group. I have a PR6-10 preamp which works fine on my
main radio but doesn't work on radio number 2. I am able to receive
OK through the preamp using secondary antenna but the preamp does not
work to amplify signals on 6 and 10 meters. I know the preamp works
fine. Has anyone had a failure of their KXV3A interface causing
similar problem? Thanks and 73, Steve W0SZ
--
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
