On Tue,1/6/2015 11:10 AM, Don Wilhelm wrote:
Digital modes normally use only the left channel, although there are some applications that allow you to switch it to the right.
WSJT-X, MMTTY, and 2-Tone all can be set to decode either channel. WSJT10 only connect to the left channel. I've been lobbying with them to add channel switching.
The K3 Line In and Line Out jacks are stereo type, but there is no connection to the ring contact
That's true only for a single-RX K3.
, and the audio will only appear on the normal left channel.
If you have the Sub-RX installed, it's audio will appear between ring and shell.
If you run MMTTY with WinWarbler, you can open a second 2Tone decode window. It can look at the same signal or the other RX.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com