Good suggestions, Hans, noted for a future release. Some have been mentioned previously.
73, Wayne N6KR On Jan 9, 2015, at 11:32 AM, Hans J Rasmusen OZ7BQ <oz...@yahoo.dk> wrote: > Hello,After about 2000+ QSOs with my KX3 please allow me to suggest a few > items, that may improve the operations. Please bear with me, if I have missed > something. > 1) When the KX3 is switched off with the RIT activated, RIT will be off when > the rig is turned on again, even though the RIT symbol is shown in the > display. (Minor problem) > 2) When turning the subreceiver on (with PF2) the OFS symbol is turned on. > The VFO-B should be turned on when activating the SUB RX, in order to adjust > the RX frequency. (As it is now, you have to push the VFO B knob to activate > the VFO, which is an extra operation when entering a pile-up). (Major problem) > > 3) For operating convenience in quiet environments, the lowest monotor level > (MON 1) should be reduced 6 - 10 db in order to reduce operator fatigue. This > would be particularly helpful in contests using a PC logging and keying tool, > where you just want to know what is happening. The Monitor setting on the K2, > does this very nicely. > Tnx for listening, 73 OZ7BQ, Hans Jørgen. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
