Are you using a rig controller? In my experience, depending on how 'chatty' your rig controller is, it can interfere with the KX3/KXPA100 init routine. It is certainly the case with mine (wizkers.io), since it not only talks to the KX3 but also the KXPA100, every second.
Ed, W6ELA On Fri, Jan 16, 2015 at 10:59 AM, Irwin Darack <idar...@gmail.com> wrote: > I recently checked and upgraded all of the Firmware with my KX3 (MCU = > 2.27, & DSP = 1.3), KXPA (1.32) and PX3 (1.16) that was older. > > I found that it lost communications from the KX3 to the KXPA100. Hence it > results in turning PA Mode Off. Even when I go back into the Menu settings, > turn PA Mode on again, It results in turning PA Mode back off again. > > Even though I had full communications between the KX3 and KXPA100, to > resolve the problem, I had to going into the utility program for the PX3, > making sure it was communication with my computer, which it was, then > update the KX3 Menu PA Mode to on. > > I am not sure where the glitch is occurring. I have the standard cable set > up as in the PX3 Manual and all data rates are set to 38400 baud. It seems > to be related to the PX3. > > Is there a way to extend the time out for the KXPA100? > > Thanks, Irwin > > -- > Irwin KD3TB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to edou...@lafargue.name > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
