I had the same problem. You must run the TX Gain Calibration using a 50
ohm dummy load after loading FW 5.04
Mike
KI0HA
On 1/24/2015 09:49, Alfredo Velez WP3C via Elecraft wrote:
HI
Install beta version K3FW5R04 and low watt in some bands. I went back
and put K3FW5R01 and became normal again.
Alfredo Velez WP3C/NP4DX
e-mail: mailto:w...@aol.com
Web: http://wp3c.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mtebe...@mchsi.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
