Hi Barry, There is an asterisk that appears on the left side of the KPA500 display whenever the key out signal from your transmitter is present. You should not see the asterisk when you are receiving. If you are then is it possible that you are using the key out signal to operate some other device in addition to the KPA500?
73, Mike K2MK Barry Simpson wrote > My KPA500 has just developed an issue. Specifically when I switch it from > Stby to Oper, the level of received signals drops by around 5 or 6 s > points. It still transmits fine and there are no adverse SWR indications > or > loose co-ax plugs. It does the same on all bands. I switch back to Stby > and > the received signals return to normal. > > I seem to recall that someone else posted details of a similar such > problem > some time ago. Any suggestions would be helpful before I email the > Elecraft > hot line. > > Barry Simpson VK2BJ -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-Issue-tp7597707p7597710.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com