Update - I don't understand how or why, but if I set CW Skimmer's "Audio
IF" to -6150 Hz, that brings the K3 and CW Skimmer frequency readouts
into agreement. There is an explanation of audio IF in the Skimmer help
file, but I can't get my brain around it.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 2/4/2015 4:37 PM, Pete Smith N4ZR wrote:
I've been experimenting with using the K3 with CW Skimmer to work K1N.
I'm feeding LP-Pan 2 from the K3's IF, and running CW Skimmer if
Softrock IF mode. I'm using Omnirig to read the K3s frequency and
control it. This works super well at least down through 15 meters - I
can see the first 10 KHz of the pileupabove K1N's transmit frequency,
and see exactly where he last worked someone.
However... I just tried the same technique on 30M, where K1N is
currently at 10113.1. I can't see him or his pileup at and above that
frequency, but if I tune the radio down to 10107.9, ghe appears on the
waterfall with the expected humongous pileup over the next few KHz
above. So now I'm wondering, is the relationship between IF frequency
and dial frequency perhaps different on the lower bands? Has anyone
tried this same thing and been able to make it work on 40 and below?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
