My first post on this didn't make it to the list due to clerical error on my part, so here is attempt two. The sub-receiver in my K3 is equipped with a 2.7 5 pole filter in position 1, and a 400Hz 8 pole in position 5. All works well until I narrow the bandwidth to 400 Hz, then the sub-receiver goes quiet (the main continues to work normally.) I used the K3 utility to set filter 5 bandwidth both narrower and wider, and wherever it is configured is where the receiver goes quiet. I can't find anything in the archives about this particular problem, but thought I would seek the group collective wisdom before tearing into the radio. Thanks, Chuck Teague, NN7U ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com