I had the same problem with my CMP / PWR encoder for several years. I
finally replaced all four of the push button encoders last November. I
wrote up what I did at <http://www.n5na.net/s9y/>.
73, Alan N5NA
Date: Thu, 12 Mar 2015 12:34:43 -0700
From: Dennis W0JX via Elecraft <elecraft@mailman.qth.net>
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Sluggish Encoders
Message-ID:
<1426188883.37643.yahoomailba...@web162601.mail.bf1.yahoo.com>
Content-Type: text/plain; charset=us-ascii
My K3 also has been having trouble with sluggish encoders. The worst one is
keyer speed. Sometimes (not always) turning the speed control doesn't
change the speed. The power control takes FOREVER to move from 100 watts
down to 50 or less. My shift control is jumpy at times but width seems to
be OK.
Since the speed and shift controls are not always problematic, I suspect a
software conflict.
73, Dennis K3 #3481
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
