I had RFI problems trying to use the y cable, so I did a work around. Since I have RX antennas I sometimes need to use through an MFJ 1026 to fight my local noise problems. So I built a little box with a switch in it. I use 12v power from an external source (not the back of the K3) When I want to run the preamp I throw the switch and apply power to the PR6-10. Kind of a round about way to do it, but it works like a charm.
73 GB, Sam K5OAI Ian Kahn wrote > All, > > I decided to take the plunge this spring and see what 6m is all about. To > that end, I purchased a PR6-10 NIB from an estate sale, and am eager to > get > it installed with my K-Line. I already have the ACC port on my K3 occupied > by the KPAK3AUX cable for the KPA500/KAT500. I'm looking for any > suggestions on how to get the DIGOUT1 line from the cabling for the PR6-10 > to pin 11 on the ACC port without totally destroying the KPAK3AUX cable. > If > anyone has already done this, and could provide guidance, I'd be very > appreciative. > > Thanks and 73, > --Ian > > Ian Kahn, KM4IK > Roswell, GA EM74ua -- View this message in context: http://elecraft.365791.n2.nabble.com/Using-PR6-10-with-KPAK3AUX-tp7600265p7600288.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
