It may be because if you turn the preamp on while the rx ant is on. Then
the preamp will turn ON/OFF when you toogle the RX ant ON/OFF. I hope
that is clearer than mud.
Rich
On 3/21/2015 10:53 PM, Ian Westerland wrote:
Hi! My K3 arrived last Wednesday and has since been set up and is now
in use. It is a great transceiver I am enjoying getting to kno.
I am using a Hampod to provide access via voice output and am
wondering about the RX antenna button on the K3 front pannel. When I
turn the RX antenna off and on, the Ham Pod announces "Pre-amp." When
I press the Pre-amp button the Ham Pod annunces "Pre-amp enabled/
disabled" depending on which press of the button is active.
Is the Pre-amp announcement on the RX antenna button what you see on
the screen? I would have thought that the button for the RX antenna
would be announced as the Rx antenna off/on.
By trying out the transceiver I was able to interpret ok so am not
having any problems.
Thanks in anticipation of an answer/explanation.
73
Ian Westerland, VK3vin
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rwnewbo...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
