SYNC DATA provides a very short turnaround time by disabling operations that would require switching the synthesizer frequency between receive and transmit. (This is analogous to CW QRQ mode.) If you have the new synth installed (KSYN3A), the delays will be much shorter even with SYNC DATA turned off.
73, Wayne N6KR On Apr 5, 2015, at 8:27 AM, hb9brj <hb9...@gmail.com> wrote: > I was able to narrow down the problem. It is related to SYNC DATA > (CONFIG:SYNC DT) which forces the same crystal filter to be used for both RX > and TX. As long as SYNC DATA is OFF everything works as expected. > > If SYNC DATA is ON: > (1) Toggling between SHIFT/WIDTH and LO/HI CUT is inhibited > (2) SHIFT control is inactive > (3) LO CUT and HI CUT both act as WIDTH control > > Am not sure if these limitations are a logical consequence of SYNC DATA ON > or an unwanted side-effect. > > 73, Markus HB9BRJ > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-SHIFT-WIDTH-in-DATA-A-mode-tp7601016p7601025.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
