As a cautionary tale, reading the instructions is really not optional with this stuff :)
If you decide to install the KRX3 for example, there are lots of little gotchas in the KRX3 install that are easily avoided by reading the directions. Not doing so is certainly at your own peril. Tom NY4I Principal Solutions Architect Better Software Solutions, Inc. 727-437-2771 > On Jun 21, 2015, at 9:18 PM, Don Wilhelm <w3...@embarqmail.com> wrote: > > Russ, > > If you install the KSYN3A for the main and then add the KRX3, you must have > the KSYN3A for the sub as well. > You cannot mix the synthesizers - they must both be the same. > > Cheap/thrifty/cost effective does not matter, they both need to be the same. > > 73, > Don W3FPR > > 73, > Don W3FPR > >> On 6/21/2015 8:59 PM, Russ wrote: >> All: >> >> For those of you who don't read instructions like me - remember to download >> and install the latest K3 utility before uploading the new 5.14 firmware (or >> above) - otherwise you may get an FPF load error. >> >> Question - if I decide to install a KRX3 later, can I reuse the old KSYN3 >> for it - can the old KSYN3 and the new KSYN3A coexist in the same box? OK - >> call me cheap / thrifty / cost effective or just stupid if you want :>} > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to t...@xmission.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com