Wanted to check with the group to see if anyone else has had a similar situation where they hear a "crackling" nose in the the background when recording a voice message using the KDVR3. I only recently started to use the module for voice recording and noticed the noise immediately. Key points to note; - it presents itself only when in "voice" modes. CW records clearly, that is no background noise. - I can disconnect everything from the radio (except power source of course) and the noise it will be on the recording. - In testing I even disconnected the microphone from the K3 and pressed record in SSB mode and the "crackle" noise could be heard. - Computers and everything else I can think of were turned off as well. - If the "MIC" gain is off there is no crackle on the recording. However, as soon as the "MIC" gain is turned up, even a little, the crackle is in the background and "yes" the "CMP" is off. I have chatted with the the Elecraft Techs but they seem to have run out of ideas at the moment. I checked the Archive as well but saw nothing there. I just wanted to see if anyone else has had a similar experience. Thanks, Bill - W0BBI
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
