ERR KEY means the key jack (or paddle?) is closed as start-up. Note, that can also mean the DTR or RTS line on the RS-232 port is being held high if you have CONFIG:CW-PTT set to anything other than OFF-OFF.
73, ... Joe, W4TV On 2015-06-22 4:42 PM, Jack West wrote:
First problem with my K3 in five years. I have no MENU or CONFIG display. NADA... I have an "ERR KEY" display. I reloaded the latest Software via the K3 utility program, including the DSP. I did not see anything wrong in the CONFIGURATION file. The utiliuty program says the down load was satisfactory. Any ideas where I look? 73 de Jack / W7LD / "Lucky Dog" ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
