On 6/25/2015 7:28 PM, Edward R Cole wrote:
I believe Wayne stated the caps on the main board that require replacement are 0403 sized sm "chips".
No. On the main RF board (and the sub RX board if necessary) it's merely adding a through-hole cap. If you have the KBPF3 (no A) then you need to do the SM work. As Wayne stated earlier in the thread, you will be able to send your KBPF3(s) to Elecraft and have them do the work. AFAIK there is no KBPF3B ;) If you've got/buy KBPF3A(s) then the mod is already done to them.
If I'm not mistaken, Mouser part # 647-RL81C221MDN1KX should be appropriate for use on the main RF board/sub RX.
73, Ross N4RP -- FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.” ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
