The "solution" is to run the SignaLink soundcard levels at a lower
output level so you do not encounter distortion.
With that being done, the SignaLink will likely not produce its PTT
output reliably.
With the K3, use VOX to initiate transmit rather than the SignaLink PTT
- it will work just fine provided you set the VOX gain level correctly.
For those who have doubts about my 'solution', consider that the
SignaLink uses the audio level to determine whether to activate its PTT
output. That is nothing more than a simplified VOX. The K3 VOX is much
better at detecting a particular audio level and activating transmit
than the SignaLink because the K3 VOX level is adjustable. So ignore the
SignaLink PTT output and use the K3 VOX instead to initiate transmit -
it will work much better.
The alternative is to use the data mode software to put the K3 into
transmit rather than depending on the SignaLink PTT output. Most data
mode applications have the capability to put the K3 into transmit via an
RS-232 command if you set the software up to do that.
In other words, do not fight the SignaLink limitations, use it as an
external soundcard only and ignore its other functions.
BUT then, a better quality external soundcard can be had at less than
half the price of a SignaLink and will do a better job.
Yes, the SignaLink with its cables specific for the radio you have makes
it easy for a beginner to get started, but that simplicity has its
limitations, and those limitations have already been expressed in this
thread.
73,
Don W3FPR
On 7/4/2015 7:40 PM, Joe Subich, W4TV wrote:
In general the modifications documented on the several web pages
are sufficient. However, improving the power supply bypassing
and decoupling noise sources will also help the noise floor.
The big problem that none of the modifications address is the need
to run the Windows (digital) output at 100% in order for the VOX
to trigger properly. Unfortunately, the PCM29xx series USB CODEC
gets a little dirty at max output and with the unstable reference
to the op amps, the transmit distortion is only compounded *before*
the TX level control.
73,
... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com