N1MM has the capability to turn the KRX3 on and off depending on spots, and can undo what you last did on the front panel. Doing a hold on RX ANT on the front panel will toggle the KRX3 between MAIN and whatever is connected to the AUX input. The latter could either be the BNC or the SO239 not in use by the TX, depending on where the KRX3 aux input was connected at assembly.
73, Guy K2AV On Sat, Aug 8, 2015 at 10:27 PM, Ignacy <n...@arrl.net> wrote: > Please ignore. After a few turning of and on, reloading N1MM, etc., KRX3 is > working well again. Have no idea why BNC input was not working. > Ignacy > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/KRX3-always-uses-antenna-from-main-RX-tp7606130p7606131.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k2av....@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com