If you get a pure carrier you either have the data sub-mode
(AFX hold) set to FSK_D or your data program is not operating
correctly (generating a single tone).
73,
... Joe, W4TV
On 8/11/2015 11:06 PM, Rich Seifert wrote:
On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV <li...@subich.com> wrote:
On 8/11/2015 8:56 PM, KE1B wrote:
Is there any way for the K3S to take its audio from the USB codec
rather than the Line-in or Mic-in?
Exactly the same configuration as AFSK with audio via Line In but
no connection to the Line In jack.
Mode = DATA
SubMode = AFSK A
MENU:Mic Sel = Line In
Mic gain set for four bars of ALC with fifth bar flickering
I have that configuration, but when I transmit, I only get a pure carrier, no
data diddling.
Rich KE1B
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
