I am trying to program my first "Rotating Macro", where the PF1 Button
will set SPLIT+1 the first time it is pressed and held and it will UNSET
SPLIT the second time it is pressed and held.
I am basing this on the work by W8TN and LA3ZA, and others who have
offered support here.
I have had PF1 as SPLIT+1 and PF2 as SPLIT+5. They are saved in MACRO1
and MACRO2, respectively.
I am trying to add MACRO3 and MACRO4 to CLEAR SPLIT and set to SPLIT+1
and SPLIT+5 again.
I added the following to MACRO1 based on the Programmers reference:
MN110;SWT20;SWH18;SWT14;
#20 is listed as MACRO3, #18 is listed as PF1.
But, the SPLIT part of the MACRO works, but the MACRO is not
reprogrammed. So, little joy.
When I execute the MACROs from K3 Utility, the reprogram things fine.
But not when I hold the button.
I hope I don't have to "add" these in CONFIG every time. That doesn't
make sense.
(100) 72, Byron
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
