I think the switch emulation commands (SWT/SWH) are the key to this -
page 23, table 8, of the latest programmers reference. Looks like SWT
11 might get you there...
geoff - W1OH
On 9/11/15 20:55, Gerard Elijzen wrote:
Hi all,
I would like to create 2 macros which operate as follows:
Macro 1:
Turn power to 10W
Play CW message 1
Macro 2:
Turn power to 1W
Play CW message 2
Setting power is easy with the “PC010; and PC001; command.
However I can’t find a command to play a stored CW message in the KX3.
Anyone?
Gerard
vk2jng at iCloud dot com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to gall...@whoi.edu
--
*******************************************************************
Geoff Allsup, W1OH gall...@whoi.edu or w...@whoi.edu
Senior Engineer Upper Ocean Processes Group
Woods Hole Oceanographic Institution Woods Hole, MA, USA
*******************************************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com