Thanks Jim.
It may have sounded ignorant, but I was concerned that there might be RFI
and RF in the shack issues, although I couldn't see how MFJ allowed for this
and they obviously don't. :-)
I will probably sell the MFJ 998 as it has shortcomings for me. It refuses
to tune out a bad SWR on some bands and although it
should tune with as little as 5 watts, it occasionally insists on QRO from
the IC7100 which is fixed at 10 watts for tuning.
Obviously the K3 is far superior and allows the user to specify a "sensible"
tuning power and it also seems to almost tune fresh air.
73,
Alan. G4GNX
-----Original Message-----
From: Jim Brown
Sent: Thursday, September 17, 2015 6:00 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500/KAT500
On Thu,9/17/2015 9:31 AM, G4GNX - Alan wrote:
Does the KAT500 have the capability to tune a random wire, even just
connected to the center of a SO239
Of course -- that's how almost any tuner would do it.
or are there other ways of achieving this?
No
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com