Anything that disables the synthesizer will produce those symptoms. Check the TMP cables that connect the KREF3 to the KSYN3 and to the K3 RF board to make sure they are all properly seated. If your K3 has the newer KSYN3A synthesizer board (mounted on the front panel shield with the KREF3) you should see a green LED glowing brightly when you look down from the top (it's on the back of the board near the top edge). If it's blinking the synthesizer is NOT locked and will produce the symptoms you are experiencing. Normally it will be glowing steadily.
73, Ron AC7AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
