I knew there was something I did not understand about that. That also explains why I had do an ACC2 = ON to make the KX3 work with the KXPA100.
On Wed, 30 Sep 2015 14:29:21 -0700 Wayne Burdick <n...@elecraft.com> wrote: > Frank, > > ACC2 has two outputs: a keyline for the amp (always on), and a > general-purpose programmable output (GPIO). The latter is what's controlled > by the ACC2 IO menu entry. You can use this signal for various functions as > described in the ACC2 IO menu entry. > > When the amp is used with our custom KXPA100 interface cable, the ACC2 > keyline signal is routed to the amp, and the GPIO signal is broken out to its > own connector for your use. > > 73, > Wayne > N6KR > > > On Sep 30, 2015, at 1:25 PM, frank <fr...@k5dkz.com> wrote: > > > > > ACC2 = OFF appears to be a factory default. Why? > > > > Other rigs do not disable the amp keying line. Why was it neccessary to do > > that in the KX3? > > -- > > Frank - K5DKZ > > KX3 - 7550 > > PX3 - 1143 > > KXPA100 - 1566 > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to n...@elecraft.com > -- Frank - K5DKZ KX3 - 7550 PX3 - 1143 KXPA100 - 1566 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com