The KAT500 can read, but not pull down the 4 band change lines. Dick, K6KR
Sent from my iPhone > On Oct 8, 2015, at 21:07, Cliff Frescura <c...@cfcorp.com> wrote: > > Hi, > > > > If I change bands on the KAT500 via the PC Data port, it appears that the > new band data is not sent to the Amp Control connector. Is this expected > behavior? (hoping no). > > > > For reference, my setup is: > > > > Kenwood TS-940 > > DXLabs Logging program > > KAT500 > > KPA500 > > > > The 940 is connected to the computer and controlled by DXLabs. DXLabs is > configured to send commands to the KAT500 (follow the 940). This all works > fine. I'm now trying to have the KPA500 follow the KAT500 via the Amp > Control connector on the KAT500 (with E850463 cable). > > > > 73, > > > > Cliff K3LL > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to d...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
