Byron,
There can be several causes - Fred Cady has given you a list of
possibilities, but I did not see two in that list.
Do you have a microphone connected that might have a stuck PTT switch?
Do you have anything plugged into the ACC connector?
Unplug *everything* except the antenna and power cord - if the message
is still present when power is turned on, contact K3support.
73,
Don W3FPR
On 10/12/2015 3:04 PM, Byron Peebles wrote:
I don't see any instructions in how to acknowledge and clear the ERR
KEY message from VFO B.
As a result, I'm walking through MENU and CONFIG using K3 Utility macros.
This ERR KEY is happening during power on with no USB no KEY and no P3
connected, so I'd like to clear the message so I can spin through the
settings menus faster..
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com