Forest,
That sounds like a problem between you and your computer.
If you are specific about the computer you are using, perhaps someone
with the same setup can help you. I think the solution (if any) will be
found in the soundcard mixer. It may or may not allow the selection of
Line Out plus speaker.
73,
Don W3FPR
On 10/29/2015 5:40 PM, Forest Shick wrote:
Thank you for all the information.
I set the MIC BTN to OFF and adjusted the MIC GAIN for 4 bars (ALC) and turned
on VOX.
I am able to TX and RX SSTV, PSK32 and RTTY. (No contacts mostly receiving and
transmitting into a dummy load until I have all the bugs worked out.)
BUT I have to disconnect the LINE OUT from the computer to monitor the received
signal and then plug it back in to transmit.
Plugging in the LINE OUT connector to the computer mutes the computer speaker.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
