yes, the k3 recognizes when the kpa500 is turned on. the cables are e850463. ( i also have a new kat500....i get same result whether i have it or out of line)
radio setting in kpa500 is set to k3 i also updated all firmware yesterday thinking that might help....no change. scott Sent from Republic Wireless Cray-1 > On Oct 31, 2015, at 12:28 AM, Jack Brindle <jackbrin...@me.com> wrote: > > Let’s make sure the K3 and KPA are communicating. When you power on the KPA, > does the K3 indicate that something changed? It should display > the KPA power event on the display. If not: > * what cable are you using between the K3 and the KPA? > * Check the RADIO setting in the KPA. It should be set to K3. > > Is there anything else connected to the AUX IO ports on either the K3 or KPA? > > - Jack Brindle, W6FB > Elecraft Engineering > >> >> On Oct 30, 2015, at 10:23 PM, NE9U - Jasper <skjas...@att.net> wrote: >> >> Just hooked a new kpa500 to a k3. >> >> when switching bands on the k3, the kpa500 doesnt follow. it does follow >> when i apply power. >> >> the reverse does work....if i switch bands on the kpa500, the k3 follows. >> >> tried 2 different auxillary cables...same result with both. >> >> am i missing some setting i need to change? >> >> scott ne9u >> >> >> Sent from Republic Wireless Cray-1 >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to jackbrin...@me.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com