Not the issue. The post was meant for support, not the list. Mea culpa! 73, Mike NF4L
> On Nov 24, 2015, at 7:59 AM, Per-Tore Aasestrand <p...@ieee.org> wrote: > > The P3 translates the speed of the K3. > Both K3 & P3 should be set to the same baudrate for performance reason. > > P-T > LA7NO > > > On 24 November 2015 at 13:54, Mike Reublin NF4L <n...@comcast.net > <mailto:n...@comcast.net>> wrote: > I'm writing a Windows program for the K3. It connects at 38400 only. In > trying to figure out what's wrong, I set my P3 and K3 to 9600 and used the K3 > Utility. It will not connect. > > If I set the K3 to 38400 and leave the P3 at 9600, the utility connects, but > reports it's connected at 9600. > > Puzzlement is rampant. > > 73, Mike NF4L > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > <http://mailman.qth.net/mailman/listinfo/elecraft> > Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> > Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net> > > This list hosted by: http://www.qsl.net <http://www.qsl.net/> > Please help support this email list: http://www.qsl.net/donate.html > <http://www.qsl.net/donate.html> > Message delivered to p...@ieee.org <mailto:p...@ieee.org> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
