Hi Charles, Per-Band Memories Each of the M1 – M4 memories can be used on each of the bands to store information. For example, on 20 meters you might program M1 to 14.000.00 CW, M2 to 14.070.00 DATA, M3 to 14.150.00 USB, and M4 to your favorite 20 meter net frequency. Because these are per-band memories, you can use M1 – M4 again on other bands. Storing a Per-Band Memory 1. Set VFO A and VFO B frequencies and other information to be stored (CW, SSB, antenna, pre-amp, attenuator settings, etc.). 2. Tap V>M and then tap M1 – M4. Recalling a Per-Band Memory 1. Tap M>V and then tap M1 – M4. Erasing a Memory 1. Select the memory to be erased by tapping V>M and rotating VFO A to the memory to be cleared and then tapping CLR. You cannot clear the M1 – M4 quick memories this way. These can only be reprogrammed.
Cheers, Fred KE7X "The Elecraft K3s and P3 -- Getting the Most from Your High Performance Station" For all KE7X Elecraft books, see www.ke7x.com ________________________________________ From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of James Bennett <w6...@me.com> Sent: Wednesday, November 25, 2015 12:40 PM To: char...@k5ua.com Cc: Elecraft Reflector Reflector Subject: Re: [Elecraft] M1 - M4 per band quick memories Charles, I believe it’s pretty simple: Go wherever you want on a particular band, set the mode you want memorized, press V>M, and then press the M1, M2, M3, or M4 memory bank you want it held in. To go back there, get on the proper band, press M>V, then whatever memory (M1…) you want. Jim / W6JHB > On Wednesday, Nov 25, 2015, at Wednesday, 10:44 AM, char...@k5ua.com wrote: > > > > Just got my K3S yesterday and spent most of the night setting up the > menu and config selections. On Page 16 of the manual, it states that M1 > - M4 can be used as "per band" memories that can be used to set up CW > and SSB frequencies for each band. Unfortunately, I can't find more > detail on this as I scan the manual. Can someone help with the procedure > to establish M1 - M4 mode specific memories with a band? > > Also, my K3S Config menu does not have a BAT MIN position. Has it been > removed from the Config Menu system? > > Lots to learn. > > Charles K5UA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@montana.edu ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
