> > Brian - you da man! > > Seeing that /dev/ttyUSB0 in your message lit up the light bulb in the dark > attic! I recall messing around with that when I set up my K3 to do some > digital stuff long ago. One of the things that threw me for a loop was that > all of the boxes under the “Enable CAT” check box were grayed out until I > entered the location of the device (ttyUSB0). Once I did that, the KX3 and > WSPR decided to get along with one another. The KX3 is now sitting here > connected to my RPi2 decoding happily on 30 meter WSPR. And the cool thing is > that the frequencies being listed fall with in +- 3 Hz of what is reported on > WSPRnet. > > Thanks for your help! > > 73, Jim > > >> On Tuesday, Dec 8, 2015, at Tuesday, 3:06 AM, Brian Waterworth >> <brian.waterwo...@gmail.com <mailto:brian.waterwo...@gmail.com>> wrote: >> >> Yes, I have been successful in getting the RPi B+ and RPi2 (both Wheezy >> Raspian and Jessie Raspian) to connect to the KX3 with the Elecraft supplied >> cables and two different USB sound cards (Griffin iMic and Creative Labs). >> Plug and play for me. The device you need to look for is something like >> /dev/ttyUSB0. >> >> I don't do WSPR, but I do do WSJT-X and FlDigi. Both work fine on the RPi. >> I wanted the latest versions of these apps, so I built from source. WSJT-X >> was tough. FLDigi was a snap. But, what is in the RPi repos will likely be >> good enough for most. >> >> Google is your best friend when it comes to debugging issues you may find on >> the RPi. Lots of other Hams have come before you and asked the same >> questions. >> >> good luck !! >> >> regards, >> Brian >> VE3IBW >> >> On Tue, Dec 8, 2015 at 1:22 AM, James Bennett <w6...@me.com >> <mailto:w6...@me.com>> wrote: >> Has anyone on the list successfully connected a KX3 to a Raspberry Pi and >> been able to get rig control working? If so, what software application did >> you use and did you have to do anything "funky" to make it work? >> >> I am trying to get WSPR and my KX3 talking but something isn't working, as I >> keep getting a "rig control error" in WSPR. >> >> Jim / W6JHB >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> <http://mailman.qth.net/mailman/listinfo/elecraft> >> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> >> Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net> >> >> This list hosted by: http://www.qsl.net <http://www.qsl.net/> >> Please help support this email list: http://www.qsl.net/donate.html >> <http://www.qsl.net/donate.html> >> Message delivered to brian.waterwo...@gmail.com >> <mailto:brian.waterwo...@gmail.com>
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
