John, great to hear. Most of us have graduated to a 6” loop that is lighted. Frank KG9H
> On Jan 11, 2016, at 10:48 AM, wingman67 via Elecraft > <elecraft@mailman.qth.net> wrote: > > Problem solved, thanks for the pointers Don! In checking the RF board and > filter board over and over, I disassembled the front-panel board again, > resoldered pin 10 on J1 since it didn't look as good to me as it could have > been and then, as I went over everything I found an unsoldered leg on R11. > I am normally extremely meticulous when it comes to building but this one > got past me! Soldered that leg, re-assembled the FP assembly and hooked it > back up to the K1's RF and all is well. VFO works and all tests pass. > > So now I'm ready to start working on the TX section of the board. > > Thanks again Don. > > > > ----- > John Hines > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K1-no-audio-tp7612521p7612533.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kg9hfr...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
