> > Be sure you have the correct audio interface selected in the FLDIGI Config > menu. Devices select Port Audio and the correct values in Capture & Playback > window > > Also set the FLDIGI Upper Signal level to -10 to -20 dB. And set the FLDIGI > Signal range to -60 to -90 dB. These are at the lower left of the waterfall > display.
73 Bob K4TAX >> On Jan 13, 2016, at 3:02 PM, paul ecker via Elecraft >> <elecraft@mailman.qth.net> wrote: >> >> In response to my question on the Win- Fldigi Reflector that I asked >> regarding waterfall adjustments and the fact that I was seeing no signals on >> the Fldigi Scope, Dave W1HKD responded,--- If you need those controls set >> to the maximum range and lowest absolute signal (or close to it) then you >> are probably starving Fldigi for Rx audio-- >> So my question concerns Dave's comment that I am "Starving" Fldigi for >> audio Rx. Do other K3/ Fldigi users when operating in PSK 31 mode see any >> signals on the Scope view? I have tired adjusting the Rx pot on my DK II and >> Windows - Sounds- Recording -Levels with no change.. in Fldigi. I am able to >> decode signals.What settings on the K3 affect Rx audio to Fldigi? >> (Setup:Win 7 PC, micoHam DKII interface.) >> 73 Paulkc2nyu >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com