If you look at the schematic you will find that there isn't a special
voltage that is controlled going to the KSB2, just the normal 8R and 8T
power lines. So no, this board will be on all the time. BUT, 10 to 15 in
the grand scheme is not much for having SSB available on the trail. The K2
is world class in low power consumption for what it is.
Gregg R. Lengling, W9DHI, Un-Retired
K2/100 SN 3075
http://www.milwaukeehdtv.org
----- Original Message -----
From: "Dean Fewkes" <[EMAIL PROTECTED]>
To: <elecraft@mailman.qth.net>
Sent: Wednesday, February 15, 2006 8:28 AM
Subject: [Elecraft] Current drain for KSB2
I am looking at upgrading my K2 with the KSB2. The manual states 10-15 mA of
current drain and I would like to know if this turns off while in CW mode,
or if there is a way to turn it off. I will be using my K2 for wilderness
hikes and I will need to turn off non-essential drain.
Thanks!
Dean
KG7MZ
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
