You are correct that the KDVR3 is not needed for CW messages. However, you must be in CW mode (or one of the two DATA sub-modes PSK-D or FSK-D) for these messages to work. And, if you are set to SPLIT operation, VFO B must also be in CW mode.
They also work in TEST mode. However, be careful, my K3S MODE button is more fussy than the button on my K3 and sometimes when trying to get the TEST mode, I press the button not quite right and it goes to SSB/LSB so that when I press it again, now i’m in TEST mode, but in SSB instead of CW. …bill nr4c > On Jan 18, 2016, at 3:16 PM, David Christ <radio...@mchsi.com> wrote: > > I have myself confused. Is the KDVR3 required to use the CW message > memories? At first I thought it wasn’t but I used the K3 Utility to load some > messages into the CW memories. Then I placed the K3 into test mode and CW > mode. When I press any of the M1-M4 keys I get the message “NO DVR” in the > VFO B area. So is the KDVR3 required or am I doing something wrong. Neither > the K3 manual or the Cady book have helped me understand this. Neither says > the KDVR3 is needed and the KDVR3 manual only talks about voice recording > which implies it is not involved with CW message memories. > > David K0LUM > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
