Larry,
Try doing the TX Gain Calibration. It is quite easy to do from K3
Utility. If it fails in K3 Utility, then try doing it on a band by band
basis as indicated in the Calibration section of the manual.
73,
Don W3FPR
On 1/30/2016 10:27 AM, Larry Snyder wrote:
PSK31 and JT-65 stopped working on 40 meters. . Initially I see the PO at 45
watts but then it immediately backs off to a fraction of a watt with no or
very little modulation on the P3 with the transmit monitor.
I change to 20 meters and everything works just fine. Same computer, same
everything - only thing changing it the band switch on the K3??
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
