Hello Mark: The "thermal insulator" is a thin flexible rectangular bit about 1/2" by 3/4" in size that has a hole near one end and is self-stick, so it is supplied on a bit of backing paper you peel it off of when you install it on the power transistor. It may be in one of the little brown envelopes. There is a photograph of it still mounted on its backing paper in the parts list.
The Acrylic Bezel is the plastic cover over the LCD on the front panel. Look at the drawing of the K1 on the front cover of your manual and you'll see a rectangle depicting the cover with a screw at each corner covering the LCD itself and the words "Elecraft" and "K1 Transceiver". It should be in one of the brown envelopes in the kit. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark Petrovic Sent: Saturday, January 30, 2016 3:50 PM To: elecr...@qth.net Subject: [Elecraft] Unpacking the K1 package contents Hi. Would someone please post pictures of the items E700002 - Thermal insulator and E100108 - Acylic bezel I am having trouble locating and identifying them as I unpack my new K1 kit contents. Thanks. -- Mark ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com