Will do. Thanks Don. Jeff kg7hdz
> On Feb 5, 2016, at 7:25 AM, Don Wilhelm <w3...@embarqmail.com> wrote: > > Jeff, > > Connect a dummy load rather than the antenna and try it at 10 watts. If the > problem is not present, you can blame it on RF-in-the-shack being picked up > by the audio input or your computer. > If you do have an RF problem, the cure is in the antenna field. Better common > mode chokes to keep the common mode current at bay. > > 73,, > Don W3FPR > >> On 2/5/2016 9:04 AM, Thorpe, Jeffrey wrote: >> I've followed the directions in Fred Cady's book and the steps in the fldigi >> manual for setting receive and transmit levels. (Use the 'tune' button in >> fldigi, adjust computer output to 4 bars on ALC meter, keep mic setting >> where I use for voice - 5) and all seems ok to this point. When I go to >> transmit however, all bars on the ALC meter come on. >> The only thing different is when using 'tune' I have output set to 0 watts. >> When transmitting it's set to 10 watts. Any ideas? >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
