Here the filters that are in my K3 SN89XX. The SAME filters are in both the MAIN and the SUB receiver 2.7, 1.8, 700, 400, 200. The radio has all new SW loaded last Thursday when the sub receiver and filters were added. I checked the K3 utility program and they are configured the same in both the main and sub receiver.
The 200 HZ filters are a match pair with the same offsite. NO clicks when changing the filters in NON diversity mode but dual click when change filter selection BW (at transition points) in Diversity mode. (Full e-mail below). 73 Bill W4RM -----Original Message----- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Wednesday, February 24, 2016 6:31 PM To: Bill OMara <w...@aol.com>; 'Arie Kleingeld PA3A' <p...@xs4all.nl>; elecraft@mailman.qth.net Subject: Re: [Elecraft] Diversity Mode filter selection question Bill, Just as a wild guess, do you have matched filters in one and some unmatched filters in the other? With the new synth boards and the updated software, you can do diversity without matched filters, but the K3 handles the synthesizers differently that it does with matched filters. If you do have some unmatched filters, the K3 will use both synthesizers (instead of slaving the sub off the main synth) - and that could be the reason for the relay clicks. 73, Don W3FPR On 2/24/2016 6:13 PM, Bill OMara via Elecraft wrote: > Thanks Arie... I would still like to hear from ELECRAFT why my other > K3 with > New Synth boards DO Not have these relay clicks but my newest K3 89XX does. > > Not sure I'm ready to accept that all is well until someone can > explain what > is happening with these clicking noises. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
