Thanks Lyle,
I thought that was the way it should work, but I couldn't find it in the
books (not sure if I overlooked it or might be something that needs to
be added). Anyway that saves me a whole lot of shack re-wiring and I'll
be able to run two instances of MMTTY for SPLIT copy of the 2nd RX.
Also gets the HUGE HAL ST-8000A off the desk and frees up a bunch of
room on the monitor shelf.
73,
Jim, W0EB
------ Original Message ------
From: "Lyle Johnson" <[email protected]>
To: [email protected]
Sent: 3/2/2016 12:36:11 PM
Subject: Re: [Elecraft] K3S USB port question
Yes. Set the RS232 menu item to the speed you want. If it is not in
USB in that menu, then it is using the regular RS232 port.
To use the USB audio for Tx, be sure no cable is plugged into the
analog LINE IN jack.
73,
Lyle KK7P
Can the K3 be controlled using RS-232 via the RJ-45 while
simultaneously using the USB connection for it's sound card functions?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
