Press and release the pwr/mon button until pwr is lit, then rotate the dial to the right.. read the power setting on the sub rx area.
-----Original Message----- From: chris grier [mailto:chris....@blueyonder.co.uk] Sent: Tuesday, March 15, 2016 5:48 PM To: Jerry Moore; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3s no TX the tx light lights when the key is pressed and I can hear a weak sig in another RX so the PA pre driver is working I dont have the auto atu so only got one ant socket On 15/03/2016 20:53, Jerry Moore wrote: > Mode? Is the TX light flashing? Which antenna is selected? Is SWR indicated? > Does the RED led light when you key down? > > Try Cw MODE, ANT1, if you have the ATU installed bypass it for testing.. > jer > > -----Original Message----- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > chris grier > Sent: Tuesday, March 15, 2016 2:49 PM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3s no TX > > HI I switched on my K3s today and there is no RF coming out of it when > I press my Key I can hear that the pre driver is working by using > another RX, Has this happened to anyone on the list, looks like the PA > has stopped working.be fore I contact Elecraft thanks Chris > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > je...@carolinaheli.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
