Hi, For those that are using the P3 offset macro available at: http://nk7z.net/adding-an-external-keypad-to-the-k3/
or http://nk7z.net/wp-content/uploads/2016/02/CP48-Master-Spreadsheet.xls if you download the spread sheet directly, I have made a small modification to reduce the size of the transmit marker on the P3 display window. The new macro is: BW0001;SWT13;SWT13;FT1;UPB7;RT0;XT0;#SPN000060;#RCF+002500;BW0280; Basically, the macro sets bandwidth to as small as possible, then transfers that into B, initiates the split +5, and then resets the bandwidth to 2.8 KHz. This results in a nice narrow red line, that you can move around, while listening to your DX station. It no longer fills the screen with whatever bandwidth you had set prior to calling this macro. It will work either via the Genovation, or directly in the P3 if you hand type it in, and assign it to a button... -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com