K3 or K3S?
> Is there a link for step by step setup for a k3, No. AFSK or FSK? What interface? You might look at the examples for MixW and MMTTY with microHAM USB Interface III at www.microHAM-USA.com/support.html (in the USB Interface III area). While they are not Elecraft specific they should get you started in configuring the software. Note - for AFSK and PSK31, use AFSK A and DATA A respectively. Set MENU:MIC SEL to "LInE In", connect sound card audio to the LINE IN jack of the K3 and adjust the mic gain for *four bars* of ALC (ALC may flicker to the fifth bar). *DO NOT* adjust power output by adjusting the mic gain - reduce power in PSK31/63/125 to ~40 watts maximum using the PWR control. 73, ... Joe, W4TV On 3/24/2016 1:28 AM, Gary wrote:
Trying out RTTY for the first time here on my k3. Reading the setup for both I am getting bamboozled, no big surprise there I know. Getting the k3 to "talk" to the software is proving a tad difficult. (read, I'm slow?) Is there a link for step by step setup for a k3, and also, am I correct in my assumption that the software will follow VFO A as it tracks up and down the band. Using line In/Out and USB to serial for PTT. Figured I better master this BEFORE I do the IOTA expedition. Any assistance welcome, but be sympathetic folks, I'm getting older by the day you know. 73 Gary ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
