Hello, my K3 is 80xx and my friend's is 38xx
thanks
Enrico
Il 07/04/2016 22:03, Art Hejduk ha scritto:
Enrico,
How old is your K3? I believe they made a change to increase the
output on the "newer" units. I'm not sure which serial number this
began on, but mine has the higher output, and it is serial number 43XX.
73,
Art WB8ENE
On Thu, Apr 7, 2016 at 3:55 PM, Enrico Lorenzoni IU3AZC
<iu3...@gmail.com <mailto:iu3...@gmail.com>> wrote:
hello everyone,
I just compared my k3 with a friend's one and my IF out is much
lower than his k3.
I suspected it when listening on a softrock, but now I can see a
difference like 10 or 20db off.
So I inspected my k3 and the IF out connector is fine. Multimeter
says 0 ohms between bnc contacts and P86 pins on motherboard.
What can I check next?
Anyone did fix this same issue?
thanks
Enrico IU4AZC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
<mailto:Elecraft@mailman.qth.net>
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to valvetb...@gmail.com
<mailto:valvetb...@gmail.com>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
