George,
So use the 1st option until you can get the plugs and jacks to construct
the adapter.
For VOX, just set VOX on - hold the button just to the lower left of the
VFO A knob. It is a per-mode setting.
Are you using the correct DATA sub-mode? There are 4 and you should be
using DATA A which should default to USB (If it is using the wrong
sideband, the ALT button (Hold MODE) will change the sideband.
Tap DATA a second time and rotate the VFO B knob until you see DATA A.
The advantage of DATA A over SSB is that compression is turned off and
TX EQ is turned to flat automatically.
Adjust your audio level (computer soundcard output slider and MIC Gain
until you have 4 bars solid on the ALC meter with the 5th bar flickering.
Adjust the desired power output with the PWR knob. Ignore the
conventional advice for "no ALC" on the internet and also ignore the
internat advice to adjust the power with the audio level. That advice
is for transceivers other than Elecraft. Elecraft is different than
other ham transceivers in the way power is controlled.
73,
Don W3FPR
On 4/10/2016 8:01 PM, George_yv5wz wrote:
Don
I like better 2nd option too
but on Sunday....and 7:30 pm (local time).....I cant imagine where I may
find 3.5 mm conectors
How do I set up KX3 and WSJT-x soft for VOX?
By the way I get decode with radio set at USB mode ....but nothing set at
DATA mode.....any idea ?
73,
George
--
View this message in context:
http://elecraft.365791.n2.nabble.com/What-s-best-Soundcard-Interface-for-KX3-tp7616157p7616189.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
