Perfect, I'm positive I have SSB+CW enabled right now. I'll go disable and test again. Thank you so much for the quick answer!
Respectfully, David On Tue, Apr 26, 2016 at 12:58 PM, David Anderson <gm4...@yahoo.co.uk> wrote: > David, > > This happens when SSB + CW is enabled. In CW WGHT menu tap 1 to toggle > between SSB+CW (enabled) and SSB - CW > > Tapping Keyer/Mic knob toggles between Keyer speed and Mic Gain rather > than Meter Scales CMP/ALC and SWR/RF. The CMP/ALC scale is still shown > temporarily when CMP or Mic Gain are adjusted. > > You can switch to DATA mode then change meter scales by tapping Keyer/mic > knob then go back to SSB. > > > 73 from David GM4JJJ > > > On 26 Apr 2016, at 16:54, David Orman <orma...@corenode.com> wrote: > > > > Hi, > > > > I tried tapping the keyer/mic button to change the display to RF output > > from ALC while in USB and LSB modes, and it doesn't switch over. I seem > to > > remember this working before. I am on the latest firmware. Is there a > trick > > to this I'm missing? > > > > Thank you, > > David > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to gm4...@yahoo.co.uk > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com