Clay,
I see nothing in the K3 manual about Tune PWR calibration.
There is the wattmeter calibration for which you need a good 50 ohm
dummy load and a wattmeter that you can trust.
The other is the TX Gain Calibration which needs only a good 50 ohm
dummy load.
If those are both done, then your TUNE PWR setting will be accurate.
73,
Don W3FPR
On 4/26/2016 11:15 PM, Clay Autery wrote:
Not referring to the XMTR Gain cal... talking about the Tune PWR cals...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
