Open up the utility again and make sure you have specified a transmit
filter for all modes.
On 4/27/2016 7:51 PM, Gary Smith wrote:
I just added some filters to the K3s and configured the filters with
the K3 config. The radio hears perfectly on all the modes and the
filters are working beautifully. now however, it does not transmit.
It is not in test mode.
I did nothing else to the radio while I had it open.
Tapping a key, SSB or pressing XMIT and there is zero output.this at
1W or 25W.
The red TX LED lights.
It signals the relay in the amp properly.
On the P3 transmit monitor I see .02-.03W PEP registering, no SWR
reading and the LP-100A shows no sign of a signal.
I restored a known good configuration with no change.
No error messages are showing, no warning message on startup.
13.6 V on the K3 meter.
trying the ATU, it shows 5W on the display, relays clack, no output
on the P3 output except that .02-.03W & nothing on the LP100A
I have triple checked to be sure all the coax to the Synths, TXCO &
Sub are attached properly.
I have made sure all the connections to the sub RX are inserted
properly.
I must be missing something obvious. Any ideas what I might look at?
Thanks
Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kevin.sto...@mediacombb.net
--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
