On 4/29/2016 10:13 AM, j...@kk9a.com wrote:
Does anyone manufacture a commercial "x" cable? I have a MicroHAM device,
a band decoder and a KPA500/KAT500 that all need the ACC. So far have not
tried connecting all three with two "Y" cables.
They work fine using the Elecraft Y cables or you can make your own
break out cable that routs the Band Data, Key Out and Aux Bus signals
to the KPA500/KAT500 with the FSK and PTT (key In) pins going to the
microHAM Device.
BTW, I have used an Acom 2000a with a K3S and it worked great just using
the RCA relay cable.
I'm sure Tom is looking for the CAT data (from the RS-232 port) since
that is what the Acom 2000 needs - not "Band Data" (BCD). That's a
more difficult configuration and would require access to the equipment
to experiment/validate a configuration. One would expect Acom to be
able to provide the necessary information/support.
73,
... Joe, W4TV
John KK9A
from: Val
Fri Apr 29 01:31:51 EDT 2016
Tom,
I am still on K3, but there should be no difference. ACOM 2000A needs
a Y cable too. Or instead of two Y cables make a X cable :). If you
have alredy tried this but not satisfied, just write me directly.
73, Val LZ1VB
I have two K3S connected to two Acom 200A. I am using the USB
interface to
the computer and running Writelog and Wintest. The P3's are
connected via
the special Y cable on the RS232 interface.
Has anyone successfully managed to control the Acom 2000A with the
K3S?
Please share!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
